Water Trap Expert associated with this product. send mail Phone Call Online Interview Share: Send to a Friend Description Technical Specifications Product videos Water Trap Water Trap is a small tank which is placed between compressed air system (compressor) and main receiver and its role is to separate water from compressed air. Collected Water in Trap water will be discharged by auto drain. Auto drain is an automatic solenoid valve that at specified time intervals can be opened and closed. Place of usage: After compressed air after cooler. Before compressed air tanks At the end of the piping main lines of production area At the end of the piping main branch of the plumbing lines The advantages of using water traps: Absorbing destructive water droplets at compressed air. Reduce the pressure drop in the pipeline and energy saving. Reduce corrosion caused by water in the compressed air tank and pipelines. Enhance the quality of consumable air in production Reduce the severe corrosion in parts and pneumatic equipment and increase their longevity. Increase product quality and production efficiency. Higher efficiency than cost price Spare Parts and technical specifications of water traps: Install automatic drain valve with manual valve. Sandblasting and cleaning the tanks metal surfaces prior to coating with paint. Inner lining of tanks after ZINCRICH with special EPOXY for thickness 120-150 Microns External cover of tank with industrial paint for thickness 100-140 Microns Operating pressure 7-13 barg (based on the order). Test pressure 12-21 barg (in accordance with the operating pressure).